Protosys Technologies Private Limited

Based on the masters which is built using our Rapid Prototyping facilities or any other master provided by the customer, a
limited quantities of prototypes (replicas of the master) can be provided in following materials. These are essentially two component fast curing resins which are cast in the Silicone Rubber Molds.
 

Protosys	Colour	Hardness	Heat	Modulus	Tensile	Elongation	Application
			Resistance	of Elast.	Strength	at break
Ref #		Shore	degC	MN/SqM	MN/sqM	%
Flexible
F001	black	53 to 58 A	80	n.a.	2.5 to 3.5	250 to 300	Extremely Flexible Rubber Like Parts
F002	black	78 to 82 A	90	n.a.	5 to 7	230 to 280	Semi Flexible Rubber Like Parts
F003	black	63 to 66 D	100	390 to 410	19 to 22	210 to 230	Hard Rubber Like Parts
Rigid
R001	grey	83 to 85 D	80	1800 to 2000	48 to 52	4 to 5
R002	white/black	83 to 85 D	95	2300 to 2500	56 to 60	5 to 7
R003	beige	83 to 85 D	115	2500 to 2700	56 to 62	4 to 6
Transparent
T001	transparent
T002	transparent	80D	60	1500 to 1700	45 to 50	7 to 8